Show simple item record

dc.contributor.authorChmielová, Marta
dc.contributor.authorSeidlerová, Jana
dc.contributor.authorWeiss, Zdeněk
dc.date.accessioned2006-10-26T12:55:01Z
dc.date.available2006-10-26T12:55:01Z
dc.date.issued2003
dc.identifier.citationCorrosion Science. 2003, vol.45, issue 5, p. 883-889.en
dc.identifier.issn0010-938X
dc.identifier.urihttp://hdl.handle.net/10084/57432
dc.language.isoenen
dc.publisherPergamonen
dc.relation.ispartofseriesCorrosion Scienceen
dc.relation.urihttp://dx.doi.org/10.1016/S0010-938X(02)00176-2en
dc.subjectcopperen
dc.subjectcorrosionen
dc.subjectchloride solutionsen
dc.subjectquantitative analysisen
dc.subjectX-ray diffractionen
dc.titleX-ray diffraction phase analysis of crystalline copper corrosion products after treatment in different chloride solutionsen
dc.typearticleen
dc.identifier.locationNení ve fondu ÚKen
dc.description.abstract-enThe corrosion products Cu2(OH)3Cl, Cu2O, and CuCl2 were identified on the surface of copper plates after their four days treating in three different sodium chloride, sodium/magnesium, and sodium/calcium chloride solutions using X-ray diffraction powder analysis. However, the quantitative proportions of individual corrosion products differ and depend on the type of chloride solution used. Treating of copper plates only in the sodium chloride solution produced the mixture of corrosion products where Cu2O is prevailing over the Cu2(OH)3Cl and CuCl2 was not identified. The sample developed after treating of the cooper surface in the sodium/magnesium chloride solution contains Cu2(OH)3Cl and CuCl2 prevailing over the Cu2O, while the sample developed after treatment of copper in sodium/calcium chloride solution contains Cu2(OH)3Cl prevailing over CuCl2 and Cu2O was not identified.
dc.identifier.doi10.1016/S0010-938X(02)00176-2
dc.identifier.wos000180841100003


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record