Show simple item record

dc.contributor.authorHo, Sang Dang
dc.contributor.authorBrandštetter, Pavel
dc.contributor.authorPalacký, Petr
dc.contributor.authorKuchař, Martin
dc.contributor.authorDinh, Bach Hoang
dc.contributor.authorTran, Cuong Dinh
dc.date.accessioned2021-05-25T07:07:59Z
dc.date.available2021-05-25T07:07:59Z
dc.date.issued2021
dc.identifier.citationJournal of Electrical Systems. 2021, vol. 17, issue 1, p. 62-76.cs
dc.identifier.issn1112-5209
dc.identifier.urihttp://hdl.handle.net/10084/143075
dc.description.abstractThis paper describes an improving field- oriented control (FOC) in the induction motor drive (IMD) without using current sensors. The proposed current sensorless (CSL) method has achieved high performance for the speed control by the FOC technique in the IMD system. The differential equations based on state variables of stator and rotor current are used to calculate the estimated current for the FOC loop. The control voltage in the FOC loop is proposed to replace the measured voltage signal in estimation algorithms. This method can be used for non-current sensor applications to reduce the manufacturing cost or for the reconfiguration phase of the fault- tolerant control (FTC) technique. MATLAB/Simulink software is used to implement the simulations in many different operating conditions at the low- speed range. The digital signal processing (DSP) eZdsp TMS320F28335 is used to do the experiments. The simulation results and experimental results have demonstrated the possibility of using the proposed method to control the IMD without current sensors.cs
dc.language.isoencs
dc.publisherEngineering and Scientific Research Groupscs
dc.relation.ispartofseriesJournal of Electrical Systemscs
dc.relation.urihttp://journal.esrgroups.org/jes/papers/17_1_5.pdfcs
dc.rightsCopyright © JES 2010cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectfield- oriented controlcs
dc.subjectcurrent estimationcs
dc.subjectcurrent sensorlesscs
dc.subjectfault-tolerant controlcs
dc.subjectinduction motorcs
dc.titleCurrent sensorless method based on field-oriented control in induction motor drivecs
dc.typearticlecs
dc.rights.accessopenAccesscs
dc.type.versionpublishedVersioncs
dc.type.statusPeer-reviewedcs
dc.description.sourceWeb of Sciencecs
dc.description.volume17cs
dc.description.issue1cs
dc.description.lastpage76cs
dc.description.firstpage62cs
dc.identifier.wos000626776100005


Files in this item

This item appears in the following Collection(s)

Show simple item record

Copyright © JES 2010
Except where otherwise noted, this item's license is described as Copyright © JES 2010