Show simple item record

dc.contributor.authorHrabovský, Leopold
dc.date.accessioned2021-03-03T11:00:55Z
dc.date.available2021-03-03T11:00:55Z
dc.date.issued2021
dc.identifier.citationScientific Journal of Silesian University of Technology-Series Transport. 2021, vol. 110, p. 35-44.cs
dc.identifier.issn0209-3324
dc.identifier.issn2450-1549
dc.identifier.urihttp://hdl.handle.net/10084/142909
dc.description.abstractDifferent values of tension forces in the load-bearing ropes of elevators, which push the rope into the grooves of the traction discs with different pressure, are the cause of uneven wear of the grooves of the traction discs under operating conditions. Current technical standards in the EU stipulate that the load suspended on load-bearing ropes be evenly distributed to all ropes used, using one of the many construction designs for tension force equalizers in the rope system. The main subject and primary objective of this paper are to present the construction design, 3D model and produced device of one of four produced prototypes, which were constructed in the "Research and Testing Laboratory", and allow setting of differing values of tension forces in the system of ropes of a traction elevator, to values of the same size. Laboratory measurements were performed on the produced device, which enables the detection of tension forces in ropes and the magnitude of these forces in the required period to be graphically displayed on a PC. The prototype tension force equalizer can show the functionality and practical applicability of the procedure of balancing the levels of tension forces, which are of unequal strengths at the start of the laboratory measurement.cs
dc.language.isoencs
dc.publisherPolitechnika Śląska. Wydział Transportucs
dc.relation.ispartofseriesScientific Journal of Silesian University of Technology-Series Transportcs
dc.relation.urihttp://doi.org/10.20858/sjsutst.2021.110.3cs
dc.rightsScientific Journal of Silesian University of Technology-Series Transport is licensed under a Creative Commons Attribution 4.0 International License.cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjecttension force equalizercs
dc.subjectrope elevatorcs
dc.subjectload-bearing ropecs
dc.subjectring load cellcs
dc.titleTension force equalizer in a rope system using a proximity sensorcs
dc.typearticlecs
dc.identifier.doi10.20858/sjsutst.2021.110.3
dc.rights.accessopenAccesscs
dc.type.versionpublishedVersioncs
dc.type.statusPeer-reviewedcs
dc.description.sourceWeb of Sciencecs
dc.description.volume110cs
dc.description.lastpage44cs
dc.description.firstpage35cs
dc.identifier.wos000600047300003


Files in this item

This item appears in the following Collection(s)

Show simple item record

Scientific Journal of Silesian University of Technology-Series Transport is licensed under a Creative Commons Attribution 4.0 International License.
Except where otherwise noted, this item's license is described as Scientific Journal of Silesian University of Technology-Series Transport is licensed under a Creative Commons Attribution 4.0 International License.