Show simple item record

dc.contributor.authorPetruš, Michal
dc.contributor.authorMichalik, Peter
dc.contributor.authorStraka, Luboslav
dc.contributor.authorHrabovský, Leopold
dc.contributor.authorMacej, Jozef
dc.contributor.authorTirpak, Peter
dc.contributor.authorJusko, Jozef
dc.date.accessioned2020-01-28T09:55:12Z
dc.date.available2020-01-28T09:55:12Z
dc.date.issued2019
dc.identifier.citationOpen Engineering. 2019, vol. 9, issue 1, p. 660-667.cs
dc.identifier.issn2391-5439
dc.identifier.urihttp://hdl.handle.net/10084/139124
dc.description.abstractThe article deals with the description of the production of a shaped part composed of an outer pyramid and cylindrical surface, of inner cylindrical surfaces of different diameters and of an inner tongue groove. It describes the proposed tools and tool holders resulting from the technological process. In order to meet the required tolerances and shape deviations for the given component, the CTX alpha 500 two-spindle multi-axis CNC lathe was chosen for its production. Its control system enables the workshop method of programming and simulation of individual operations in automatic mode or in block-by-block mode. The design of the selected CNC lathe enables the machining of rotary parts in one clamping, which is ensured by the right and left spindle with chucks. The surface quality of the pyramidal surface and the internal diameter of D18H8 was measured using a Hommel Etamic W5 roughness gauge. The measured roughness values for the hole were: D = 18H8, Rz = 3.007 mu m, Ra = 0.729 mu m and for the pyramidal surface: Rz = 1.527 mu m and Ra = 0.329 mu m.cs
dc.language.isoencs
dc.publisherDe Gruytercs
dc.relation.ispartofseriesOpen Engineeringcs
dc.relation.urihttps://doi.org/10.1515/eng-2019-0075cs
dc.rights© 2019 M. Petruš et al., published by De Gruyter. This work is licensed under the Creative Commons Attribution 4.0 Public License.cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectCNC program simulationcs
dc.subjecttwo-spindlecs
dc.subjectmultiaxis CNC lathecs
dc.titleThe evaluation of the production of the shaped part using the workshop programming method on the two-spindle multi-axis CTX alpha 500 lathecs
dc.typearticlecs
dc.identifier.doi10.1515/eng-2019-0075
dc.rights.accessopenAccesscs
dc.type.versionpublishedVersioncs
dc.type.statusPeer-reviewedcs
dc.description.sourceWeb of Sciencecs
dc.description.volume9cs
dc.description.issue1cs
dc.description.lastpage667cs
dc.description.firstpage660cs
dc.identifier.wos000505161600002


Files in this item

This item appears in the following Collection(s)

Show simple item record

© 2019 M. Petruš et al., published by De Gruyter. This work is licensed under the Creative Commons Attribution 4.0 Public License.
Except where otherwise noted, this item's license is described as © 2019 M. Petruš et al., published by De Gruyter. This work is licensed under the Creative Commons Attribution 4.0 Public License.